Clean floor thoroughly: vacuum and/or sweep floor to remove loose dirt and grit.
Spray DuraSeal® Pre-Treat over a large section of the floor (approximately 3″ x 12″). With a standard speed buffer (175 rpm), spray and buff the floor using two DuraSeal® Pre-Treat Pads (one driving the other), so the pad contours the floor more effectively and ensures any foreign material is removed. Use of two DuraSeal® Pre-Treat Pads in conjunction with DuraSeal® Pre-Treat will provide sufficient abrasion needed to ensure adhesion. Note: Beveled edges and any visibly unbraided areas should be cleaned and abraded by hand.
Remove all residues immediately using a mop or wrung out cotton tack rag dampened with DuraSeal® Pre-Treat.
When dry, immediately apply DuraSeal® X-TERRA® Floor Finish in the sheen of your choice, making sure to follow the label instructions. Keep from freezing.